How to unlock LG Harmony 2 by code
Unlock LG Harmony 2 fast and secure by code so you can use it with the network of your choice. You didn't have to run any complicated software or need any technical expertise. Also, your phone will be permanently unlocked even after firmware updates and you don't loose your warranty. To get the code to unlock LG Harmony 2 you need to provide IMEI number. To get the IMEI number dial *#06# on your keypad or look at the sticker behind the battery of your LG Harmony 2. Your IMEI number may be 15 or 17 digits long but we need only first 15 digits of your IMEI number.
Depending on the locked network of your LG Harmony 2 you may get the following codes:
NCK Code
NSCK Code
SPCK Code
CPCK Code
SIMCK Code
Instructions to unlock LG Harmony 2
Once you received the unlock code for LG Harmony 2 from GSMUnlockHub.com, you can enter it by using the following instructions:
Method #1
- Insert a non-accepted sim card (the sim card which is not supported by your phone
- Your phone prompts to enter Sim Network Unlock Pin or Unlock Code
- Enter the Unlock code (NCK code) and confirm
- Your phone may automatically reboot
- Your LG Harmony 2 is now unlocked
Method #2
- Insert the accepted (original) sim card in your phone
- Go to the dial screen and press 2945#*model number# For example if your phone model is d950 you have to enter 2945#*950# or if its a d955 you have to enter 2945#*955# etc.
- A menu will be pop up to enter the Unlock Code
- Enter the Unlock code (NCK code) and confirm
- Your LG Harmony 2 is now unlocked
Method #3
- Insert the accepted (original) sim card in your phone
- Go to the dial screen and press 2945#*71001# or 2945#*20001#
- A menu will be pop up to enter the Unlock Code
- Enter the Unlock code (NCK code) and confirm
- Your LG Harmony 2 is now unlocked
Detailed instructions to unlock LG Harmony 2
If your phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked now. If you are not receiving any signal after unlocking, make sure your wireless connections are turned on and APN settings are properly configured for the new network.
Please Note: If the code doesn't work, you may be required to perform a factory reset or a hard reset.